Conventional

REMOVAL
1. Disconnect the battery.
2. Remove the headlamp switch.

CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.







3. Carefully release the four clips and remove the steering column opening cover.







4. Remove the instrument panel finish panel.
1 Remove the bolts.
2 Remove the instrument panel finish panel.







5. Remove the instrument cluster.
1 Remove the bolts.
2 Disconnect the electrical connectors.
3 Remove the instrument cluster.
^ If equipped, remove the transmission range indicator.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Following installation of the new instrument cluster, reset the PCM ID and carry out the PATS parameter reset procedure. Refer to Instrument Cluster Parameter and PCM ID Reset Procedure. Instrument Cluster Parameter and PCM ID Reset Procedure