Second Row Seat

Safety Belt Bolt Bit:

SPECIAL TOOL(S)

REMOVAL

NOTE: This procedure is for the LH side; the RH side is similar.







1. Release the tab and open the safety belt guide cover.

NOTE:
^ If the safety belt guide cover is damaged or it does not remain closed, install a new cover.
^ The safety belt guide has been removed for clarity.







2. Remove the safety belt guide nut. Remove the safety belt guide.







3. Remove the C-pillar trim panel.

NOTE: Remove upper attachments first, followed by the front lower attachment and the lower rear hook.







4. Remove the height adjuster cover.







5. Remove the shoulder safety belt height adjuster.
1 Using the special tool, remove the bolts.
2 Remove the adjuster.

INSTALLATION
1. To install, reverse the removal procedure.
^ Check the active restraint system for correct operation.

NOTE: Bolts should be started by hand.