Third Row Retractor

Safety Belt Bolt Bit:

SPECIAL TOOL(S)

REMOVAL

NOTE: This procedure is for the LH side; the RH side is similar.







1. Remove the safety belt guide bolt cover.
^ Carefully pry out at the bottom.







2. Using the special tool, remove the safety belt guide bolt.
3. Remove the quarter trim panel.

NOTE: On vehicles equipped with auxiliary A/C, only the auxiliary A/C access panel needs to be removed and not the quarter trim panel.







4. Remove the detachable anchor.
^ Depress the release button.







5. Remove the rear safety belt retractor.
1 Using the special tool, remove the bolt.
2 Remove the retractor.







6. Remove the detachable anchor tongue trim cover.
1 Remove the bolt.
2 Remove the pushpin.
3 Remove the trim cover.

NOTE: Steps 6 and 7 are only necessary if a new detachable anchor tongue needs to be installed.







7. Remove the detachable anchor tongue.
1 Using the special tool, remove the bolt.
2 Remove the detachable anchor tongue.

INSTALLATION
1. To install, reverse the removal procedure.
^ Check the active restraint system for correct operation.