Camshaft, Engine
CamshaftTheoretical valve lift @ 0 lash
Lobe lift-intake 8.466 mm (0.333 inch)
Lobe lift-exhaust 9.461 mm (0.372 inch)
Allowable lobe lift loss
Journal diameter 26.929 - 26.936 mm (1.060 inch)
Camshaft journal bore inside diameter
Camshaft journal-to-bearing clearance-standard 0.025 - 0.076 mm (0.001 - 0.0029 inch)
Camshaft Journal-to- bearing clearance-service limit 0.151 mm (0.005 inch)
Runout
End play-standard 0.07 - 0.15 mm (0.002 - 0.005 inch)
End play-service limit 0.277 mm (0.010 inch)
Camshaft position sensor bolt 10 Nm (89 inch lbs.)
Lubricate the bearing surfaces of the camshaft journal thrust caps with clean engine oil, install the caps, and loosely install the bolts.
Tighten the bolts in the sequence shown.