Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test D

PINPOINT TEST D: THE INSTRUMENT CLUSTER DOES NOT RESPOND TO THE DIAGNOSTIC TOOL


Test D1-D2:






Test D2-D3:






Test D4-D5:






Normal Operation
The instrument cluster communicates with the diagnostic tool through the SCP communications network circuits 4-EG7 (GY/RD) and 5-EG7 (BU/RD). If one of the bus wires becomes shorted to ground or voltage, or if some but not all termination resistors are lost communications can continue. Check circuits 4-EG7 (GY/RD) and 5-EG7 (BU/RD) between the instrument cluster C220b and the data link connector (DLC) C251. Total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in circuit 4-EG7 (GY/RD) and 5-EG7 (BU/RD), damage to the DLC C251, joint connector No.4 or damage to the instrument cluster C220b.

Possible Causes
- circuits 4-EG7 (GY/RD) and 5-EG7 (BU/RD) shorted to ground or open
- joint connector No.4 C223
- instrument cluster C220b
- DLC C251
- instrument cluster