Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test J

PINPOINT TEST J: THE DRIVER DOOR MODULE (DDM) DOES NOT RESPOND TO THE DIAGNOSTIC TOOL


Test J1:






Test J2-J3:






Test J3-J4:






Test J5-J6:






Test J6-J7:






Normal Operation
The DDM communicates with the diagnostic tool through the SCP communications network circuits 4-EG13 (GY/OG) and 5-EG13 (GY/OG). If one of the bus wires becomes shorted to ground or voltage, or if some but not all termination resistors are lost communications can continue. Check circuits 4-EG13 (GY/OG) and 5-EG13 (GY/OG) between the DDM C501a and the DLC C251. Total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms, there is either an open in circuit 4-EG13 (GY/OG) or 5-EG13 (GY/OG), damage to the DLC C251, damage to the DDM C155a, or a problem in the interior auxiliary junction box (AJB) C283c, C283d or joint connector No.4 C223.

Possible Causes
- circuits 4-EG13 (GY/OG) and 5-EG13 (GY/OG) shorted to ground or open
- C501a
- interior AJB C283c, C283d
- joint connector No.4 C223
- DLC C251
- DDM