Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmitter

REMOTE TRANSMITTER PROGRAMMING

NOTE: Programming (or reprogramming) of the remote transmitters can be accomplished using a diagnostic tool or by carrying out the following steps:

1. Cycle the key from OFF to RUN 8 times within 10 seconds with the 8th time ending in RUN. The locks will then lock and unlock, confirming that the program mode has been entered.

2. NOTE: When the first remote transmitter is programmed, all other remote transmitters are erased. So all remote transmitters should be programmed when one remote transmitter is programmed.

Press any button on the transmitter to be programmed.

3. If additional remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
4. To exit program mode, turn the key to START or wait 7.5 seconds.