Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2005 >> Aviator 2WD V8-4.6L DOHC VIN H >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair

CRANKSHAFT POSITION (CKP) SENSOR







Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the accessory drive belt.
3. Disconnect the crankshaft position (CKP) sensor electrical connector.
4. Disconnect the A/C compressor electrical connector.
5. Loosen the 3 A/C compressor bolts enough to allow the compressor to move approximately 1 inch.
- To install, tighten to 25 Nm (18 lb-ft).

6. Remove the CKP sensor bolt.
- To install, tighten to 10 Nm (89 lb-in).

7. Remove the CKP sensor.
8. To install, reverse the removal procedure.
pro multis · About Operation CHARM