Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

Anti-Lock Brake System (ABS) Module





Removal and Installation

NOTE: When installing a new module, it must be calibrated and configured (either by download/upload or uploading the as-built data method).

1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

Disconnect the battery ground cable. For additional information, refer to Battery.





2. Disconnect the anti-lock brake system (ABS) module electrical connector.
3. Remove the 3 bolts and the ABS module.
^ To install, tighten to 2 Nm (18 inch lbs.).
4. To install, reverse the removal procedure.