Ignition Lock Cylinder - Functional

IGNITION LOCK CYLINDER - FUNCTIONAL







Removal and Installation
1. Disconnect the battery.
2. Remove the tilt wheel handle and shank.
3. Remove the 3 screws and the lower steering column shroud.
4. Position the shift selector boot aside.
5. Insert the ignition key and turn it to the ACC position.
6. Release the 2 PATS transceiver tabs and rotate the PATS transceiver until there is access to the ignition lock cylinder release pin hole.
7. Using a suitable tool, press the ignition lock cylinder release pin while pulling out the ignition lock cylinder.
8. To install, reverse the removal procedure.
- Verify the ignition lock cylinder operation.