Brake Pedal Assy: Testing and Inspection

Programming Adjustable Pedal Positions
An adjustable pedal position can be stored at any time.

Programming adjustable pedal positions can be accomplished by this procedure:
^ An adjustable pedal position can be stored at any time. To store the adjustable pedal position to memory, the driver must move the pedals to the preferred position using the adjustable pedal switch. The driver must then depress the memory SET switch. Within 5 seconds, the driver must select a memory position. Memory No. 1 is selected by depressing the 1 switch. Memory No. 2 is selected by depressing the 2 switch.
^ If no memory switch input is received within the 5 second time limit, the operation is aborted. If one of these inputs is received during the 5 second programming limit, the operation will also be aborted:
- Adjustable pedal switch
- Power driver seat switch
- Power outside rearview mirrors switch
- Memory SET switch

To program the remote keyless entry (RKE) transmitter, refer to Locks.