Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver Seat Module (DSM)

DRIVER SEAT MODULE (DSM)







Removal and Installation

NOTE: Prior to removal of the module, it is necessary to upload the module configuration information to a scan tool. This information needs to be downloaded into the new module once installed.

1. NOTE: A new DSM is delivered in a manufacturing mode with a pre-set DTC of B2477. This DTC will clear when the module has been successfully configured (or PMI). DTC B2477 may need to be cleared after a successful configuration (or PMI).

Remove the driver seat.

2. Remove the 2 screws.
3. Disconnect the electrical connectors.
4. Remove the DSM from the seat bracket.

5. NOTE: Once the new module is installed, it is necessary to download the module configuration information from the scan tool into the new module.

To install, reverse the removal procedure.