Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2010 >> MKZ AWD V6-3.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 6F35 >> Disassembly and Assembly of Subassemblies >> Clutch Support Tower

Clutch Support Tower




Clutch Support Tower





Disassembly

1. Using a suitable tool, remove and discard the 4 Teflon(R) seals.





2. Clean and inspect the clutch support tower for damage. Install a new clutch support tower if damaged.





Assembly

1. Install the Input Shaft Support Seal Installer 307-578/3 on the clutch support tower and adjust the Input Shaft Support Seal Installer to align the bottom edge of the tool with the top edge of the bottom Teflon(R) seal groove.





2. Install a new Teflon(R) seal on the Input Shaft Support Seal Installer 307-578/3.





3. Install the Input Shaft Support Seal Installer 307-578/2 over 307-578/3. Using the Input Shaft Support Seal Installer 307-578/2, slide the Teflon(R) seal over the clutch support tower and into the groove.





4. Remove the Input Shaft Support Seal Installer 307-578/2 and 307-578/3.
- Repeat Steps 1 through 4 for the other 3 Teflon(R) seals.





5. Install the Input Shaft Support Seal Installer 307-578/1 on the clutch support tower to size the 4 Teflon(R) seals.





pro multis · About Operation CHARM