Audio Input Jack

Audio Input Jack









Removal and Installation

1. Remove the floor console rear panel by pulling straight rearward to disengage the clips.

2. Remove the LH and RH floor console finish mouldings.
- Using a suitable tool such as a trim removal tool, pry upward to disengage the clips.





3. Remove the 5 screws and the floor console stowage bin door.

4. NOTE: Release the rear clips of the LH and RH floor console upper trim panels (located along the top-outer edges of the floor console) to gain access to the floor console stowage bin screws.

Remove the 2 screws and the floor console stowage bin.

- Disconnect the electrical connectors.

5. Release the tabs and remove the audio input jack.





6. To install, reverse the removal procedure.