Axle Nut
Front Drive Halfshafts
All vehicles
NOTICE: Do not tighten the front wheel hub nut with the vehicle on the ground. The nut must be tightened to specification before the vehicle is lowered onto the wheels. Wheel bearing damage will occur if the wheel bearing is loaded with the weight of the vehicle applied.
NOTE: Apply the brake to keep the halfshaft from rotating.
Step 1: Using the previously removed wheel hub nut, seat the halfshaft.
Tighten to 350 Nm (258 lb-ft).
Remove and discard the wheel hub nut.
Step 2: Install a new wheel hub nut.
Tighten to 350 Nm (258 lb-ft).