Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pinpoint Test H: DTCs U1000:00




Remote Function Actuator (RFA) Module

Pinpoint Test H: DTCs U1000:00

Normal Operation

- DTC U1000:00 (Solid State Driver Protection Active - Driver Disabled: No Sub Type Information)- a continuous DTC that sets when the RFA (Remote Function Actuator) module has disabled an output circuit due to a repetitive fault causing a circuit overload.

This pinpoint test is intended to diagnose the following:

- Output circuit short to ground or voltage

- RFA (Remote Function Actuator) module

PINPOINT TEST H : DTCs U1000:00

H1 REVIEW THE DTCs

- Review the DTCs from the RFA (Remote Function Actuator) module self-test.

Are any other DTCs besides U1000:00 or U3000:49 present?

Yes
REFER to Diagnostic Trouble Code (DTC) Chart Remote Function Actuator (RFA) Module. After the repair, GO to H2.

No
GO to H2.

H2 CARRY OUT THE RFA (Remote Function Actuator) MODULE SELF-TEST

- Carry out the RFA (Remote Function Actuator) module self-test.

Is only DTC U3000:49 present?

Yes
INSTALL a new RFA (Remote Function Actuator) module. REFER to Remote Function Actuator (RFA) Module . TEST the system for normal operation.

No
The system is operating correctly at this time. The concern was caused by a short from an output circuit.