Front Fender: Service and Repair

Fender

Removal and Installation

1. Remove the front bumper cover.

2. Remove the front bumper cover bracket.
- Remove the front bumper cover bracket screw.

- Remove the front bumper cover bracket bolt.


3. Remove the front fender front rail bolts.
- To install, tighten to 9 Nm (80 lb-in).


4. Remove the fender splash shield. For additional information, refer to Fender Splash Shield Fender Splash Shield.

5. Remove the 2 front fender lower bolts.
- To install, tighten to 9 Nm (80 lb-in).


6. Remove the 3 front fender upper bolts.
- To install, tighten to 9 Nm (80 lb-in).


7. Remove the front fender rear inner bolt.
- To install, tighten to 9 Nm (80 lb-in).


8. Remove the 2 front fender upper rear bolts.
- To install, tighten to 9 Nm (80 lb-in).


9. To install, reverse the removal procedure.