Pinpoint Test B : The Shift Control Is Out Of Correct Gear Relationship

External Controls - Column Shift

PINPOINT TEST B : THE SHIFT CONTROL IS OUT OF CORRECT GEAR RELATIONSHIP

B1 CHECK THE SHIFT CONTROL LINKAGE

- Apply the brake pedal.

- Gain access to the column shift control linkage.

- Position the selector lever in all ranges.

- Observe all linkages during operation.

Is the linkage damaged?

Yes
INSTALL a new column shift control linkage. TEST the system for normal operation.

No
GO to B2.

B2 CHECK THE SELECTOR LEVER CABLE

- Check selector lever cable and bracket for installation and tightness.

Is the selector lever cable correctly installed and adjusted?

Yes
VERIFY the selector lever cable adjustment. REFER to Selector Lever Cable Adjustment . ADJUST the selector lever cable if necessary. GO to B3.

No
REPAIR as necessary. TEST the system for normal operation.

B3 CHECK THE LINKAGE/CABLE FOR CORRECT GEAR RELATIONSHIP

- Apply the brake pedal.

- Position the selector lever in all ranges.

Does the indicator match the gear selection?

Yes
System OK. TEST the system for normal operation.

No
REFER to Instrument Panel, Gauges and Warning Indicators.