Sedimentor - Modification
Category4
Applicable Model/s
1983 B2200
Subject
SEDIMENTOR MODIFICATION
Bulletin No. 045/83
Issued 6/13/83
Revised
Sedimentor Assembly:
DESCRIPTION
In order to improve the serviceability of the sedimentor, the following modifications have been made.
1. Location and configuration of the drain plug have been changed.
2. Material of the air vent plug has been changed.
3. The angle of the inlet pipe has been changed.
VIN OF PRODUCTION CHANGE
B2200 Short Bed: JM2UD121 D0701217 April, 1983
B2200 Long Bed: JM2UD221 D0721469 April, 1983
PARTS INFORMATION
PART NUMBER
NEW OLD DESCRIPTION QTY INTERCHANGEABILITY
S213 13 840B S213 13 840A Sedimentor 1 NEW to OLD
S277 23 459 S213 23 459 Drain Plug 1 NO
S277 23 420 S213 23 420 Cover 1 NO
S277 23 458 S213 23 458 Air Vent Plug 1 NO
S277 23 461 S213 23 461 O-Ring, Air Vent Plug 1 NO
S277 23 410 S213 24 410 Body 1 NO
Note: The new cover can be installed on the former body if the cover is replaced together with drain plug.