Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1983 >> GLC L4-1490cc 1.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Technical Service Bulletins >> Engine Performance - Driveability Improvement Kit >> Kit Installation Procedures (83/84 GLC) >> Modified Servo Diaphragm Field Installation Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Modified Servo Diaphragm Field Installation Procedures

PARTS INFORMATION

Modified Servo Diaphragm: 8325-13-950A

STEP 1 Inspecting for previously installed modified Servo Diaphragm.

Black Dot On Servo Diaphragm:




1) Look for black dot on Servo Diaphragm.

If black dot is present a modified Servo Diaphragm has already been installed.

If a black dot is not present proceed with the installation.

Servo Diaphragm:




STEP 2 Install the modified Servo Diaphragm.

1) Remove the old Servo Diaphragm and replace it with the modified one.

2) Once the modified Servo Diaphragm has been installed adjust the Servo Diaphragm.

a. Disconnect the Br connector from the solenoid on the firewall.

b. Engine speed should increase to 1100-1300 rpm. If the proper reading is not obtained, adjust the throttle positioner.

Note: 1300 rpm is recommended.
pro multis · About Operation CHARM