Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1983 >> RX7 2RTR-1146cc 70 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Exhaust Temperature Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Exhaust Temperature Sensor: Testing and Inspection


SYSTEM TEST
1. Remove sensor, then wrap sensor and a thermometer with aluminum foil and place into a suitable container filled with oil.
2. Connect battery voltage and test lamp to the electrical connector sensor terminals.
3. Using a suitable heater, gradually heat the oil. Test lamp should illuminate when oil temperature is between 248-284°F, (120-140°C).

CAUTION: Do not exceed 302°F (150°C) when heating oil.

4. If sensor does not operate within specified limit, replace heat hazard sensor.


RESISTANCE
1. Disconnect electrical connector from thermo sensor.
2. Check for continuity between thermo sensor terminals using an ohmmeter.
3. If there is no continuity between terminals, replace sensor.
pro multis · About Operation CHARM