Wiper Motor: Service and Repair

1. With wiper motor operating, disconnect battery ground cable when wiper blades reach upper limit of travel.
2. Remove wiper arm attaching nuts and the wiper arms.
3. Remove seal caps, then the wiper linkage shaft retaining nuts, cup washers and outer bushings.
4. Remove cowl plate attaching screws, then disconnect washer hose from nozzle and remove cowl plate.
5. Disconnect wiring connections from wiper motor, then remove wiper motor and link assembly retaining bolts.
6. Remove wiper motor and link assembly from vehicle.
7. Reverse procedure to install.