Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1993 >> MX-5 Miata L4-1597cc 1.6L DOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Testing and Inspection

Igniter Testing:






NOTE: This test requires Mazda Special Service Tools (SST) or aftermarket equivalents.

1. Disconnect igniter connector. Do not ground power connector terminal (Blue: 1-pin) or wiper 20A fuse will be blown.
2. Connect adapter (SST #49 N018 001) between igniter and wiring harness.
3. Attach igniter checker (SST #49 F018 002) to adapter harness.
4. Connect igniter checker power leads to power connector terminal (Blue: 1-pin) and ground.
5. Connect a voltmeter between igniter checker (brown wire) and a ground
6. Turn ignition switch "ON." Verify approximately 12V at brown wire terminal. If voltage is incorrect, check related wiring.
7. While observing voltmeter, push igniter checker switch SW2. Do not activate SW2 for more than one second.
8. Check that voltmeter indicates approximately 8V.
9. If not as specified, replace igniter.
10. Disconnect voltmeter from brown wire and connect it to gray wire.
11. Repeat steps 5 through 9.
pro multis · About Operation CHARM