Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Connecting Rod: Testing and Inspection
1.
Measure
connecting rod small end bore, which should be 0.9033 - 0.9039 inch (22.9430-022.960 mm).
2.
Check interference between small end bore and
piston pin, which should be 0.0005 - 0.0014 inch (0.013 - 0.037 mm).
3.
Check each
connecting rod for bending or twisting. Bend or twist should not exceed 0.0016 inch per 3.937 inches, replace as necessary.