Shift-Lock Actuator
Replacement1. Disconnect the negative battery cable.
2. Remove the front and rear console.
3. Remove the indicator screws and lift up the indicator panel.
4. Disconnect the shift-lock actuator connector.
5. Pull the hold switch terminals out of the connector.
6. Remove the shift-lock actuator.
7. Install the new shift-lock actuator.
8. Insert the hold switch terminals into the connector.
9. Connect the shift-lock actuator connector.
10. Install and adjust the indicator panel.
11. Install the front and rear console.
12. Connect the negative battery cable.
13. Verify correct operation of the shift-lock system.