Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> 929 V6-3.0L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Vehicle Speed Sensor-Revolution Sensor (Output Shaft)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vehicle Speed Sensor-Revolution Sensor (Output Shaft)


Replacement




1. Disconnect the negative battery cable.
2. Remove the front exhaust pipe (left side).
3. Disconnect the Vehicle Speed Sensor connector.
4. Remove the Vehicle Speed Sensor.
5. Apply Automatic Transmission Fluid (ATF) to a new 0-ring and install it on the Vehicle Speed Sensor.
6. Install the new Vehicle Speed Sensor.

Tightening Torque: 5.0-6.8 Nm (44-6O in.lb.)

7. Connect the vehicle speed sensor connector.
8. Install the front exhaust pipe.
9. Connect the negative battery cable.


pro multis · About Operation CHARM