Ignition Coil Pack: Service and Repair

View: Coil Pack:

REMOVAL:
1. Disconnect the electrical connector from the Coil Pack.

View: High-Tension Lead Lock Tabs:

2. Remove the High-Tension Leads by squeezing the locking tabs to release the coil boot retainers.

NOTE: If vehicle is equipped with air conditioning, remove the air conditioning tube to plenum bolt and move the tube enough to gain access to the upper Coil Pack bolts.

3. Remove the Coil Pack mounting screws and remove the Coil Pack from the mounting bracket.

INSTALLATION:
1. Install the Coil Pack on the mounting bracket and torque the coil pack mounting screws to: 5-7 Nm (44-62 in.lb.).
2. If vehicle is equipped with air conditioning, reposition the air conditioning tube, re-install the tube mounting bolt and torque to: 26-32 Nm (19-23 ft.lb.).
3. Apply silicone dielectric compound to the High-Tension Lead connectors.
4. Connect the High-Tension Leads and electrical connector to the Coil Pack.