Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> MX-3 V6-1844cc 1.8L DOHC >> Repair and Diagnosis >> Maintenance >> Tune-up and Engine Performance Checks >> Distributor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Distributor: Service and Repair

Numbers In Image Represent Removal Sequence:





REMOVAL
Removal Preparation
Turn crankshaft to #1 cylinder TDC and note rotor position.


Remove the following items in the order listed.
1. Resonance duct.
2. Negative battery cable
3. Distributor connectors
4. Spark plug wires.
5. Distributor assembly.

NOTE: Do not turn engine while distributor is removed.

INSTALLATION
Install in reverse order of removal and note the following:
1. Coat O-ring with engine oil and coupling shaft with grease.
2. Ensure that #1 cylinder is at TDC.
3. Install distributor with rotor pointing in same direction as it was during removal.
4. After installation, adjust ignition timing to 9° - 11° BTDC.
5. Tighten mounting bolt to 19 - 25 Nm (14 - 18 ft.lb.).
pro multis · About Operation CHARM