Blower Motor: Service and Repair

Fig. 5 Blower Motor Replacement:

1. Disconnect battery ground cable.
2. Remove undercover of instrument panel on passenger side.
3. Remove glove compartment and bracket in upper part of glove compartment.
4. Remove instrument panel. Refer to Dash Panel Service.
5. Remove ducts between blower unit and heater unit.
6. Remove blower unit mounting nuts, then disconnect Fresh-Rec air selector wire and harness connector.
7. On models with A/C, remove instrument panel bracket for removal of blower unit.
8. Remove blower unit assembly, then disassemble unit and remove blower motor in numbered sequence shown, Fig. 5.
9. Reverse procedure to install.