Rear Side Seals

Fig. 47, Installing Apex Seal Spring:

1. Insert the each apex seal spring confirming the spring direction as shown in Fig. 47.
2. Install the corner seal springs and corner seals into their respective grooves.

Fig. 48, Installing Side Seal And Springs:

3. Install the side seal springs and side seals into their respective grooves, as shown in Fig. 48.
4. Fit each side piece to its original position, and confirm that the spring is set correctly on the side piece.
5. Apply engine oil onto each seal, and confirm the smooth movement of each seal by pressing its head.
6. Apply the sealing agent on the rear side of the front rotor housing, as instructed under FRONT ROTOR HOUSING.
7. Place new O-ring, sealing rubbers and protector on the rear side of the front rotor housing, as instructed under FRONT ROTOR HOUSING.
8. Apply engine oil onto the sliding surface of the front rotor housing. Make sure that the front rotor housing is free of any foreign matter.