Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Auxiliary Air Valve (Idle Speed) >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Auxiliary Air Valve (Idle Speed): Testing and Inspection




Removal/Installation
1. Disconnect negative battery cable.
2. Remove the extension manifold.
3. Disconnect the solenoid valve connector.
4. Remove the accelerated warm up system (AWS) solenoid valve as shown in the figure.
5. Install in the reverse order of removal.




Inspection
1. Remove the AWS solenoid valve. (Refer to steps 1-5 above.)
2. Measure the solenoid valve resistance with an ohmmeter.

Resistance: 9.3-11.3 ohms 20°C (68°F)

3. If not as specified, replace solenoid valve.

pro multis · About Operation CHARM