Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> PCME Pin Tests
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

PCME Pin Tests







Inspection with Engine Signal Monitor
1. Connect the special service tools SSTs to the powertrain control module engine (PCME) as shown.

NOTE: Use connector A of the adapter to measure voltage at terminals 1A through lV and 3A through 3P, and use connector B to measure voltage at the terminals 2A through 2L and 4A through 4Z.

2. Place the SST (Sheet: 76-pin type) on the SST (Engine Signal Monitor).
3. Measure the voltage at each terminal.

See: PCME Terminal Voltage Charts.

4. If any PCME terminal voltage is incorrect, check the input or output device and related wiring. If they are normal, replace the PCME.

CAUTION: Applying voltage to SST terminals A or B will damage the SST.
pro multis · About Operation CHARM