Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Fuel Pressure >> Testing and Inspection >> Fuel Line Pressure Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Line Pressure Inspection

Fuel Line Pressure Inspection

WARNING: Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious Injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedures."




1. Disconnect the negative battery cable.




2. Install a fuel pressure gauge as shown in the figure.
3. Connect the negative battery cable.




4. Connect data link connector terminals F/P and GND with a jumper wire.
5. Turn the ignition switch ON.
6. Measure the fuel line pressure.

Fuel line pressure: 250-260 kPa (36-38 psi)

Pressure low:
- Measure fuel pump maximum pressure. If as specified, the fuel line or fuel filter might be clogged or restricted.
Pressure high:
- Replace the pressure regulator.



pro multis · About Operation CHARM