Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1995 >> MPV 4WD V6-3.0L SOHC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Distributor >> Service and Repair >> Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal/Installation




Removal
1. Remove the high-tension leads.
2. Turn the crankshaft so that the No.1 cylinder is at the top dead center of compression.
3. Loosen the distributor lock bolt.
4. Remove the distributor. Do not turn the crankshaft until the distributor has been reinstalled.





Installation
1. Install the distributor and connect the high-tension leads and distributor connector.
2. Tighten the lock bolt to the specified torque.

Torque specification: 19-25 Nm (14-18 ft.lb.)

3. Adjust the ignition timing.
4. Verify that the No.1 cylinder is at the top dead center and the distributor matching marks are correctly aligned.
pro multis · About Operation CHARM