Fluid - M/T: Testing and Inspection
1. Park the vehicle on level ground.
2. Disconnect the vehicle speedometer sensor connector and remove the vehicle speedometer sensor.
3. Verify that the oil level is between the F and L.
4. If the oil level is low, add the specified oil through the speedometer driven gear hole.
Capacity: 2.68 L (2.83 US qt, 2.36 Imp qt)
5. Install the vehicle speedometer sensor.
Tightening torque: 7.9-11.2 N.m (80-115 kgf.cm, 70-99 in.lbf)
6. Connect the vehicle speedometer sensor connector.