Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cooling Fan Control Inspection

SYSTEM INSPECTION
1. Connect a jumper wire between the terminals TEN and GND of the data link connector.
2. Turn the ignition switch ON.

Rotate Throttle By Hand:

3. Rotate the throttle link by hand and verify that coolant fan and condenser fan operates.
4. Disconnect the jumper wire.
5. If not specified, inspect as following.
- Engine control module (ECM) 1N terminal voltage
- ECM 1K terminal voltage
- Coolant fan relay
- Condenser fan relay