Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1995 >> Millenia V6-2255cc 2.3L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Testing and Inspection >> Component Tests and General Diagnostics
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Component Tests and General Diagnostics




Inspection
Resistance
1. Disconnect the crankshaft position sensor connector.
2. Measure the resistance between terminals A and B by using an ohmmeter.

Specification: 950-1,250 (1,100 ± 150) ohms

3. If not as specified, replace the crankshaft position sensor.




Air Gap
1. Measure the air gap between crankshaft pulley and crankshaft position sensor by using a feeler gauge.

Specification:
0.5-1.5 (1.0 ± 0.5) mm (0.040-0.080 in)

2. If not as specified, replace the crankshaft pulley or the crankshaft position sensor.




NE Signal Illustration
- After warm-up idle with no load condition.

pro multis · About Operation CHARM