Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1995 >> Millenia V6-2496cc 2.5L DOHC >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Boost Control Solenoid >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EGR Boost Control Solenoid: Testing and Inspection





System Inspection


1. Warm up engine to normal operating temperature and let idle.
2. Disconnect the vacuum hose from the EGR boost sensor side of the EGR boost sensor solenoid valve.
3. Put a finger on the port of the EGR boost sensor solenoid valve and verify that no vacuum is felt.

EGR Boost Sensor Solenoid Valve


1. Remove the EGR boost sensor solenoid valve.
2. Blow air into each part and verify that air flows as specified below.




3. If not as specified, replace the EGR boost sensor solenoid valve.
4. Apply battery positive voltage between the terminals of the EGR boost sensor solenoid valve.
5. Blow air into each port and verify that air flows as specified below.




6. If not as specified, replace the EGR boost sensor solenoid valve.

pro multis · About Operation CHARM