Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1995 >> Protege L4-1.5L DOHC >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Engine Overhaul >> Engine Stand Mounting/Dismounting >> Mounting
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Mounting

MOUNTING





1. Use the holes shown in the figure.





2. Install the SST (arms) to the holes as shown in the figure, and hand tighten the SST (bolts).





3. Assemble the SST (bolts, nuts, and plate) in the specified positions marked A, E and I.





4. Install the SST assembled in step 3 to the respective arms.
5. Adjust the SST (bolts) so that less than 20 mm (0.79 in) of thread is exposed.
6. Make the SST (plate and arms) parallel by adjusting the SST (bolts and nuts).
7. Tighten the SST (bolts and nuts) to affix the SST firmly.





8. Mount the engine on the SST (engine stand).
pro multis · About Operation CHARM