Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1995 >> Protege L4-1.5L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Overdrive Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Overdrive Switch: Testing and Inspection

INSPECTION
Inspection of operation




1. Turn the ignition switch ON.
2. Verify that the O/D OFF indicator light is not illuminated. Depress the O/D OFF switch and verify that the O/D OFF indicator light illuminates.
3. If not as specified, check the terminal voltage of the O/D OFF switch.

Inspection of voltage
1. Remove the rear console and front console.
2. Turn the ignition switch ON.




3. Measure the voltage at the O/D OFF switch connector.
4. If not as specified, check for continuity at the O/D OFF switch.

Inspection of continuity
1. Disconnect the negative battery cable.
2. Disconnect the O/D OFF switch connector.




3. Check for continuity at the O/D OFF switch.
4. If not as specified, replace the selector lever knob.
5. If the switch is OK, check the wiring harness. (O/D OFF switch - Powertrain control module,O/D OFF switch - Body ground.)
6. Connect the O/D OFF switch connector.
7. Install the front console and rear console,
8. Connect the negative battery cable.

pro multis · About Operation CHARM