Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1995 >> RX7 2RTR-1308cc 80 >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair


Removal/Installation
1. Remove in the order shown in the figure.
2. Install in the reverse order of removal, referring to Installation Note.




1. Battery cable
2. Drive belt
3. Eccentric shaft pulley
4. Crankshaft position sensor plate
5. Bracket
6. Connectors
7. Crankshaft position sensor (NE-signal)
8. Crankshaft position sensor (G-signal)




Installation Note
Measure the crankshaft position sensor to crankshaft position sensor plate clearance by using feeler gauge.

Clearance: 1.0-2.0 mm (0.040-0.078 in)

pro multis · About Operation CHARM