Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1996 >> B4000 2WD V6-4.0L OHV >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil Pack >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil Pack: Service and Repair

IGNITION COIL PACK REMOVAL / INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order shown in the figure, referring to Removal Notes.
3. Install in the reverse order of removal, referring to Installation Notes.


Coil Pack:




REMOVAL NOTES
1. Disconnect the harness connector from the coil.
2. Disconnect the high-tension leads by squeezing the locking tabs to release the coil boot.

NOTE: On vehicles equipped with A/C, remove the air conditioning tube-to-plenum bolt and move the tube enough to gain access to the upper coil pack bolts.

3. Remove the coil bolts and remove the coil.

INSTALLATION NOTES
1. Position the coil on the mounting bracket.

Tightening torque 5-7 Nm (44-62 in. lbs.)

2. On vehicles equipped with A/C, reposition the air conditioning tube.

Tightening torque 26-32 Nm (19-24 ft. lbs.)

3. Connect the high-tension leads and the harness connector to the ignition coil.
pro multis · About Operation CHARM