Spark Plug: Service and Repair

SPARK PLUG REMOVAL / INSTALLATION
1. Remove and install the high-tension leads carefully.

Spark Plug Wire Removal:

CAUTION: Pulling on the wire part of the spark plug lead may break it. To remove the lead, pull only on the boot.

2. Remove and instal the spark plugs with a plug socket.

Install Spark Plug Socket Squarely Over Spark Plugs:

CAUTION: To avoid breaking the spark plug, be sure to fit the socket squarely over it.

3. Apply anti-seize compound or molybdenum-based lubricant to the spark plug threads.
4. Tighten the spark plug to the specified torque.

Spark plug gap: 1.0-1.1 mm (0.040-0.043 in.)

Tightening torque: 15-22 Nm (11-16 ft.lbs.)