Crankshaft Position Sensor: Testing and Inspection
Resistance Inspection1. Disconnect the crankshaft position sensor connector.
Crankshaft Position (CKP) Sensor Details:
2. Measure the resistance between terminals A and B by using an ohmmeter.
Specification: 520-580 Ohms 20°C (68°F)
3. If not as specified, replace the crankshaft position sensor.
Air Gap Inspection
Crankshaft Position (CKP) Sensor Details:
1. Verify that the crankshaft position sensor is installed correctly and securely.
2. Measure the air gap between the crankshaft pulley and the crankshaft position sensor by using a feeler gauge.
Specification: 0.5-1.5 mm (0.020-0.059 in.)
3. If not as specified, replace the crankshaft pulley or the crankshaft position sensor.