Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Oxygen Sensor Heater Inspection
Oxygen Sensor Heater Inspection 1.
Disconnect the heated oxygen sensor connector.
2.
Measure the resistance between heated oxygen sensor terminals B and C by using an ohmmeter.
Specification: Approx. 6 Ohms 20°C (68°F) 3.
If not as specified, replace the heated oxygen sensor.
Tightening torque: 30-49 Nm (22-36 ft.lb.)
