Window Glass: Adjustments

1. Remove door trim panel and door trim shield.
2. Lower door window glass approximately 51 - 76 mm (2 - 3 inches) from full up position.
3. Loosen three nut and washer assemblies from guide assembly.
4. Push door window glass rearward, within the door window channel bracket, until it bottoms out within the door.
5. Move window guide post rearward within retention slot in inner panel. Tighten three guide assembly nut and washer assemblies to 7 - 11 N.m (62 - 97 lb-in).
6. Cycle door window glass up and down to check position.
7. Install door trim shield and door trim panel.