Connecting Rod

DIMENSIONS
Connecting Rod Journal
Diameter 2.0464-2.0472 inch
Out-of-Round Limit 0.0006 Max.
Taper Limit 0.0006 per inch Max.
Surface Limit (RMS) 10 Max.
Piston Pin Bore Diameter 23.124-23.144 mm (0.9104-0.9112 inch)
Crankshaft Bearing Bore Diameter 55.170-55.190 mm (2.1720-2.1728 inch)
Out-of-Round Limit 0.0004 inch
Taper Limit 0.0004 inch
Length (Center-to-Center) 5.4558-5.4591 inch
Alignment (Bore-to-Bore Max. Difference (1)
Twist 0.003
Bend 0.0015
Side Clearance (Assembled to Crank)
Standard 0.0035-0.011
Service Limit 0.014

(1) Pin bore and crank bearing bore must be parallel and in the same vertical plane, within the specified total difference when measured at the ends of an 8 in. bar- in. on each side of rod centerline.