Camber/Caster Adjuster Replacement

Camber/Caster Adjuster Replacement
1. Jack up the front of the vehicle and support it on safety stands.
2. Remove the front wheels.
3. Remove the camber/caster adjuster, referring to the following:
a. Remove the upper ball joint camber/caster adjuster clamp bolt from the axle.
b. Remove the camber/caster adjuster from the axle using Pitman Arm Puller T64-3590-F, or equivalent to remove the adjuster out of the axle.
4. Inspect all parts and repair or replace as necessary.
5. Install in the reverse order of removal, referring to the following:
Tighten clamp bolt to 68 - 92 Nm (50 - 68 ft. lbs.).
6. Inspect the front wheel alignment and adjust as necessary.