Front
1. Jack up the front of the vehicle and support it on safety stands.
2. Remove in the order indicated in the table.
NOTE: Mark the wheel hub bolt and disc plate before removal for reference during installation.
3. Install in the reverse order of removal indicated in the table, noting the following:
^ Remove any rust or grime on the contact face of the disc plate and wheel hub.
^ Install the disc plate and align the marks made before removal.
^ While installing the brake pads:
a. Push the piston fully inward by using the special service tool (SST).
b. Install the disc pad.
4. After installation, depress the pedal a few times, rotate the wheel by hand, and verify that the brake does not drag.