Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1997 >> MPV ES 4WD V6-3.0L SOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Adjustments

1. Remove the selector cable, manual shaft nut, and lever.
2. Move the manual shaft to N position.





3. Loosen the transmission range switch mounting bolts.
4. Align the holes of the transmission range switch and the manual shaft lever, and insert an approximately 4.0 mm (0.157 inch) outer diameter pin through the holes.





5. Tighten the mounting bolts to 2.5 - 3.9 Nm (22 - 34 inch lbs.), then remove the pin.
6. Recheck the continuity of the transmission range switch.
7. If not correct, replace the transmission range switch.
8. Install the lever and manual shaft nut and tighten to 30 - 39 Nm (22 - 28 ft. lbs.).
9. Install the selector cable.






pro multis · About Operation CHARM